World Journal of Chemical Education. 2021, 9(3), 81-87
DOI: 10.12691/WJCE-9-3-3
Original Research

Solving Chemical Equilibria in Titrimetry with the Inclusion of Ionic Strength Using OCTAVE and EXCEL

Juan José Baeza-Baeza1, , Olivia Pini1, Francisco F. Pérez-Pla2 and María Celia García-Álvarez-Coque1

1Department of Analytical Chemistry, University of Valencia, Burjassot, Spain

2Institute of Material Sciences (ICMUV), Paterna, Spain

Pub. Date: October 24, 2021

Cite this paper

Juan José Baeza-Baeza, Olivia Pini, Francisco F. Pérez-Pla and María Celia García-Álvarez-Coque. Solving Chemical Equilibria in Titrimetry with the Inclusion of Ionic Strength Using OCTAVE and EXCEL. World Journal of Chemical Education. 2021; 9(3):81-87. doi: 10.12691/WJCE-9-3-3

Abstract

Although Volumetric Analysis is one of the most widely used analytical techniques, there is limited published work on the use of computer software for simulation. In the few reports found in the literature, simplifications are often made for data treatment, due to the complexity of the equilibria involved. This work reports the application of a previously published methodology for calculating the concentration of chemical species, in multi-equilibrium problems, to simulate titration curves which describe the successive changes experienced in the solutions that are titrated. Two examples are solved with the help of the fsolve function in the open source computer programming language OCTAVE, and with the Solver tool in the EXCEL spreadsheet. Given that both the proposed methodology and the two computational platforms are capable of addressing complex systems without the need for simplifications, three important factors related with titrations can be considered: the behavior of the chemical indicator, the concurrence of collateral equilibria that can significantly affect the main titration reaction, and the effect of the ionic strength to explain deviations from ideality.

Keywords

chemical equilibrium, analytical chemistry, volumetric analysis, ionic strength, multi-equilibria problems, chemometrics

Copyright

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References

[1]  Harris, D.C. and Lucy C.A., Quantitative Chemical Analysis, 10th ed, Macmillan Learning, New York, 2020.
 
[2]  Soustelle, M. Chemical Equilibria, in Chemical Engineering Series, Vol. 4, ISTE Ltd, London, 2015.
 
[3]  Ravera E., Carlon, A. and Parigi, G., “Pairwise binding competition Experiments for sorting hub-protein/effector interaction hierarchy and simultaneous equilibria”, J. Biomol. NMR 60, 29-36, 2014.
 
[4]  Ganesh, K., Soumen, R., Ravichandran, Y. and Janarthanan. “Dynamic approach to predict pH profiles of biologically relevant buffers”, Biochem. Biophys. Rep. 9, 121-127, 2017.
 
[5]  de Berg, K., Maeder, M. and Clifford, S., “The thermodynamic formation constants for iron(III) thiocyanate complexes at zero ionic strength”, Inorganica Chim. Acta 466, 249-253, 2017.
 
[6]  Huysman, S., Vanryckeghem, F., De Paepe, E., Smedes, F., Haughey, S.A., Elliott, C.T., Demeestere, K. and Vanhaecke, L., “Hydrophilic divinylbenzene for equilibrium sorption of emerging organic contaminants in aquatic matrices”, Environ. Sci. Technol. 53, 10803-10812, 2019.
 
[7]  Todd, E.M. and Zimmerman, S.C., “Modeling the equilibria of complex supramolecular systems”, J. Chem. Educ. 86, 638-643, 2009.
 
[8]  Özmen, H., “Determination of students’ alternative conceptions about chemical equilibrium: a review of research and the case of Turkey”, Chem. Educ. Res. Pract. 9, 225-233, 2008.
 
[9]  Kousathana, M. and Tsaparlis, G., “Students' errors in solving numerical chemical-equilibrium problems”, Chem. Edu. Res. Pract. 3, 5-17, 2002.
 
[10]  Tyson, L., Treagust, D.F. and Bucat, R.B. “The complexity of teaching and learning chemical equilibrium”, J. Chem. Educ. 76 (4), 554-558, 1999.
 
[11]  Baeza-Baeza, J.J., Pérez-Pla, F. and García-Alvarez-Coque, M.C., “Teaching chemical equilibria using open source software OCTAVE”, World J. Chem. Educ. 3, 127-133, 2015.
 
[12]  Paz-García, J.M., Johannesson, B., Ottosen, L.M., Ribeiro A.B. and Rodríguez-Maroto, J.M. “Computing multi-species chemical equilibrium with an algorithm based on the reaction extents”, Comput. Chem. Eng. 58, 135-143, 2013.
 
[13]  Baeza-Baeza, J.J. and García-Alvarez-Coque, M.C., “Systematic approach to calculate the concentration of chemical species in multi-equilibrium problems”, J. Chem. Educ. 88, 169-173, 2011.
 
[14]  Baeza-Baeza, J.J. and García-Alvarez-Coque, M.C., “Extent of reaction balances: a convenient tool to study chemical equilibria”, World J. Chem. Educ. 2, 54-58, 2014.
 
[15]  Baeza-Baeza, J.J. and García-Alvarez-Coque, M.C., “Systematic approach for calculating the concentrations of chemical species in multi-equilibrium problems: inclusion of the ionic strength effects”, J. Chem. Edu. 89, 900-904, 2012.
 
[16]  Ring, T. and Kellum, J.A., “Modeling acid-base by minimizing charge-balance”, ACS Omega 4, 6521-6529, 2019.
 
[17]  Martín-Yerga, D., Pérez-Junquera, A., González-García, M.B., Hernández-Santos, D. and Fanjul-Bolado, P., “In situ spectroelectrochemical monitoring of dye bleaching after electrogeneration of chlorine-based species: application to chloride detection”, Anal. Chem. 90, 7442-7449, 2018.
 
[18]  De Paula, J., Atkins, P. and Keeler, J., Physical Chemistry, Oxford University Press, Oxford, 2017.
 
[19]  Davies, C.W., “The extent of dissociation of salts in water. Part VIII: an equation for the mean ionic activity coefficient of an electrolyte in water, and a revision of the dissociation constants of some sulphates”, J. Chem. Soc. 2093-2098, 1938.
 
[20]  Bates, R.G. and Guggenheim, E.A. “Report on the standardization of pH and related terminology”, Pure Appl. Chem. 1, 163-168, 1960.
 
[21]  Haouet, M.N., Altissimi, M.S., Framboas, M., and Galarini, R., “Validation of the Volhard Method for chloride determination in food”, Accred. Qual. Assur. 11, 23-28, 2006.
 
[22]  Cave, G.C.B. and Hume D.N.A., “Study of thiocyanatoargentate(I) ions by a solubility method”. J. Am. Chem. Soc. 75, 2893-2897, 1953.
 
[23]  Stipp, S.L., “Speciation in the Fe(II)-Fe(III)-SO4-H2O system at 25°C and low pH: sensitivity of an equilibrium model to uncertainties”, Environ. Sci. Technol. 24, 699-706, 1990.